Skip to content

Viking service · Los Angeles, CA

Viking repair for Los Angeles kitchens, from the burner up

Professional gas and dual-fuel ranges, wall ovens, built-in and undercounter refrigeration, panel-front dishwashers. A meter on the machine before a price, and the price before the work.

Service call
$89 flat
Visits
8:00 am – 8:00 pm, seven days
Line answered
24/7
Stainless gas range with the oven door open, one burner grate and cap lifted onto the worktop and a wrench on a folded towel
Burner cap and grate off, oven open — a range visit part-way through diagnosis

Reviews

What Los Angeles owners say

Calls in Silver Lake, Los Feliz, Studio City and Sherman Oaks.

5.0 / 51,351 reviews

  • Top rack came out with grit baked onto the glasses while the lower rack was spotless. A cracked diverter in the sump was sending water the wrong way. One part, and it washes evenly again.

    Trina H.Los Feliz

  • The cabinet felt warm inside and the interior lamps were staying lit with both doors shut. A failed door switch had been quietly warming the fresh food section. He changed the switch, checked temperatures, and it holds now.

    Sasha M.Sherman Oaks

  • The infrared broiler stopped lighting while the rest of the range worked normally. A dead spark electrode and a lazy safety valve, both changed in one visit. He explained why he tested them in that order.

    Ruben T.Los Feliz

Book a visit

Two ways in, and nothing to fill out

Call and speak to someone who fixes these, or pick your own slot on the booking page. No forms, no email chain, no quote by guesswork.

$89 flat service call, credited against the repair · visits 8:00 am – 8:00 pm, seven days · line answered 24/7

How a call runs

Diagnosis first, then a number, then the work

Nothing about this is a mystery, so none of it is hidden.

  1. 01

    Tell us what it is doing

    Someone who fixes these answers the phone. What it does, when it started, what changed in the house that week. Read us the model and serial off the rating plate and the right parts are already on the van.

  2. 02

    A flat $89 gets the diagnosis

    The $89 service call covers the trip and the diagnosis — meters on the machine, panels off, the fault found and shown to you rather than described. It comes off the bill if you go ahead with the repair.

  3. 03

    The number before the spanner

    You hear the price and what it buys before anything is opened up further. Common ignition, latch, switch, valve and pump parts ride on the van; anything model-specific is ordered off the rating plate.

Hinge brackets, bushings, bolts and washers laid out on a cloth beside long-nose pliers and three screwdrivers
Stripped hinge and latch hardware laid out before anything goes back together

The route

Four neighbourhoods, one working day

Silver Lake and Los Feliz on this side of the hill, Studio City and Sherman Oaks over Cahuenga. The route is short on purpose — it is what keeps a same-week slot realistic instead of aspirational.

Straight answers

The six things people ask on the phone

01

What does it cost to get someone out?

A flat $89 service call. That covers the visit and the full diagnosis, and it comes off the bill if you go ahead with the repair. You hear the repair price before any further work starts.

02

How quickly can you be here?

The phone is answered around the clock and visits run 8:00 am to 8:00 pm, seven days. Calls are slotted in the order they come in, and we will tell you honestly on the phone which day we can reach you.

03

Do you only work on Viking equipment?

Viking is what this shop is set up for — professional gas and dual-fuel ranges, wall ovens, built-in and undercounter refrigeration, and panel-front dishwashers. It is an independent service business, not the manufacturer.

04

Will the part be on the van?

Spark electrodes, igniters, valve stems, door switches, latch assemblies, condenser fans, inlet valves and drain pumps travel with us. Boards, elements and sealed-system parts are ordered against the model and serial on the rating plate.

05

Does a built-in have to come out of the cabinetry?

Often, yes — a column refrigerator is serviced from the base and the back, and a panel-front dishwasher has to clear its opening. It comes out on protection and goes back with the panel gaps as they were.

06

Which parts of Los Angeles do you cover?

Silver Lake and Los Feliz on the reservoir and Griffith Park side of the hill, and over Cahuenga into Studio City and Sherman Oaks. Those four neighbourhoods are the daily route rather than an aspiration.

Match the symptom

What it is doing, and what it usually turns out to be

These are the calls we take most weeks. None of it is a diagnosis over the internet — it is what the fault list looks like before anyone opens a panel.

Range Repair

A burner ticks endlessly and never catches
A cracked spark electrode, or a wet porcelain burner box after a boil-over shorting the spark to ground.
Flame burns orange and lifts away from the cap
Blocked burner ports or a cap sitting crooked on its head — grit and cooking oil, not a gas supply fault.
Knobs turned stiff enough to need two hands
Dried grease in the valve stems. They come apart, clean, regrease and go back — no new valves needed most of the time.
Griddle or broiler heats unevenly, or not at all
An element leg broken open, or a scorched connector at the terminal block behind the plate.

Refrigerator Repair

Fresh food side drifting warm while the freezer section stays solid
An evaporator fan, a blocked air duct or a defrost fault on the fresh food side — rarely the compressor.
Compressor running flat out through a heat spell and never resting
A condenser furred with dust and a condenser fan that has slowed, which valley heat then turns into a machine that never catches up.
Water collecting beneath the produce drawers
A blocked or out-of-level drain trough sending defrost water into the cabinet instead of down the tube.
A sagging door that no longer pulls itself closed
A dropped hinge and a tired gasket. Shim the hinge, reset the height, replace the seal.

Oven Repair

Cavity running well below the temperature on the dial
A drifted temperature probe or a weak igniter no longer holding the gas valve open long enough.
Preheat chime sounding long before the oven is ready
The probe reading high while the cavity is still cold — the control believes it and chimes early.
Grinding or rattling from the convection fan
A dry convection fan bearing. Caught early it is one motor; left alone it takes the blade and the housing with it.
Door locked shut after a self-clean cycle
A latch motor or door lock switch that stalled at temperature. It comes apart from the top or the door face.

Dishwasher Repair

Water left standing in the tub when the cycle ends
A blocked drain loop, a packed sump or debris in the drain pump — very often not a pump replacement.
Top rack coming out gritty while the bottom is clean
A cracked diverter or a blocked upper spray feed sending water the wrong way.
Seepage along the bottom of the door
A flattened door seal or a leak at the sump gasket that only shows under full fill.
Machine dead on the panel, or stopping partway through
A door latch switch that never sees the door as closed, or a thermistor stalling the cycle mid-programme.

Out of hours

Freezer thawing at eleven at night?

The line is answered around the clock. Ring it and someone will tell you what to do tonight — which drawer to empty, what to switch off, what not to bother with — and book you the first slot we have. Visits themselves run 8:00 am – 8:00 pm, seven days.