Answer · Los Angeles
Do You Repair Viking Range Hoods?
Short answer
Ring Viking Repair HQ Los Angeles on (213) 320-7007 with the model number and the desk will tell you whether the canopy is a job for us. A hood job is the blower, the speed control, the lighting circuit, the heat lamp sockets and the filter hardware — the ducting never is.
What a hood job actually is
The canopy is where the work is. That means the blower motor and the wheel it drives, the speed control and the fan switch, the lighting circuit with its dimmer, the heat lamp sockets that some professional wall canopies carry, and the filter frames and grease trough underneath all of it. The heat sensor that can wake a Viking blower on its own belongs to the same list. Ducted, recirculating, or driven by a ventilator fitted away from the canopy, the hood is read the same way: what draws current, what turns, and how far the grease has travelled.
Where a hood job stops being ours
The ducting is not ours to alter. Viking requires a ducted hood to exhaust outdoors through metal duct, so cutting, rerouting or capping that run is building work for a ventilation contractor under whatever rules apply at your address. Anything reached from a roof is theirs as well. If a tightly sealed Los Angeles kitchen is starving the canopy of replacement air, that too is settled with the building rather than with a part we can fit. What you will get from us is a plain verdict on which of the two you actually have.
Book a visit
Still the wrong answer for your machine?
Describe what it is actually doing and we will tell you whether it needs a visit. Flat $89 covers the trip and the full diagnosis.
Flat $89 to get someone out and the fault found · on site 8:00 am – 8:00 pm, seven days · desk answered 24/7